NO
ZORB:
The
Invisible
Waterproofing
Solution
3 YEAR
PROTECTION
NoZorb®
- the Invisible Solution
for
Waterproofing Wood, Pressure Treated Lumber, Brick, Stone, Corrugated
Pallets and Ceramics
Conventional waterproofing systems use a combination of waxes and
resins to prevent water penetration...but waxes and resins do not
dissolve in water without a surfactant to emulsify them. Over time,
usually about one year, the waxes and resins have worn away and the
surfactants are left behind. These surfactants
actually attract water
to the interior of the wood, causing it to swell, warp and crack. The
cycle of annual re-application begins! Sound familiar?
The NoZorb® Difference
NoZorb® uses a surfactant that incorporates a crosslinking agent
that reacts after the formulation soaks into wood or masonry and the
water
evaporates. Crosslinking the surfactant destroys its ability to
attract water and preserves NoZorb’s depth of penetration better than
any solvent-based system.
Completely Invisible
Protection
No-Zorb performs extremely well on all woods,
including pressure treated lumber. You can expect at least three
years before recoating, provided that you apply the two coats as
directed. Once it has dried, the product will not change the colour or
appearance of the wood grain in any way...no shine, colour or darkening
effect.
You will not know that the product has been applied until you pour
water on it. The protection is immediately obvious, because
the water will bead up and will not be absorbed by the wood.
The NoZorb Advantage
- Two coat
application
provides 3 year protection against
water penetration
- Coverage (2 coats) 170 sq. ft. per gallon
- No flammable solvents
- Excellent penetrating capability
- Built in biocide prevents mold and mildew
- Inhibits water absorption and swelling of wood
- Inhibits water absorption of masonry
- Colorless, invisible treatment leaves no shine
- Good breathing properties
- Pronounced, long term beading effect
- Cost efficient system
- Made by us right here in Canada - Buy Direct!
|
 |
Environmentally
Safe Protection for Wood and Masonry
Most water based products currently on the market contain at least some
organic solvent….but the zero-VOC, water based technology used to
develop NoZorb® exceeds current standards without sacrificing
performance or increasing cost.
Application Instructions:
Stir or shake gently before use. This product can be brushed, dipped or
spray applied to the surface. Do not apply if rain appears imminent.
Product should be allowed to dry for several hours before being
subjected to rain. Unlike many other water repellants, this product can
be over coated to provide even greater protection. Apply a second coat
after a minimum of 30 minutes, but no longer than 6 hours.
Mold and Mildew Protection
for
Log Home Construction
NoZorb® contains an effective biocide which prevents mold growth
and mildew. This product will perform well in dip tank applications.
|
